annke DN41R Скачать руководство пользователя страница 64

Страница: 64 / 106

Digital Video Recorder User Manual

Chapter 9 VCA Alarm

Purpose:

The DVR can receive the VCA alarm (line crossing detection, intrusion detection, sudden scene change detection

and audio exception detection) sent by analog camera, and the VCA detection must be enabled and configured on

the camera settings interface first. All other VCA detection features must be supported by the connected IP camera.



Only one analog camera supports the VCA settings and VCA alarm of line crossing detection, intrusion

detection, sudden scene change detection and audio exception detection.

9.1 Line Crossing Detection

Purpose:

This function can be used for detecting people, vehicles and objects cross a set virtual line. The line crossing

direction can be set as bidirectional, from left to right or from right to left. And you can set the duration for the

alarm response actions, such as full screen monitoring, audible warning, etc.

Steps:

Enter the VCA settings interface.

Menu> Camera> VCA

Select the camera to configure the VCA.

You can click the checkbox of

Save VCA Picture

to save the captured pictures of VCA detection.

Select the VCA detection type to

Line Crossing Detection

Check the

Enable

checkbox to enable this function.

Click

to configure the trigger channel, arming schedule and linkage actions for the line crossing

detection alarm.

Click the

Rule Settings

button to set the line crossing detection rules.

1) Select the direction to A<->B, A->B or A<-B.

A<->B

: Only the arrow on the B side shows; when an object going across the configured line with both

direction can be detected and alarms are triggered.

A->B

: Only the object crossing the configured line from the A side to the B side can be detected.

B->A

: Only the object crossing the configured line from the B side to the A side can be detected.

2) Click-and-drag the slider to set the detection sensitivity.

Sensitivity:

Range [1-100]. The higher the value is, the more easily the detection alarm can be triggered.

3) Click-

to save the rule settings and back to the line crossing detection settings interface.

Figure 9. 1 Set Line Crossing Detection Rules

Click

and set two points in the preview window to draw a virtual line.

You can use the

to clear the existing virtual line and re-draw it.

Up to 4 rules can be configured.

Содержание DN41R











































































































Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды

annke DN41R, Руководство пользователя

Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды