annke DN41R Скачать руководство пользователя страница 50

Страница: 50 / 106

Digital Video Recorder User Manual

If there is only one channel triggered, clicking

button takes you to Full-screen Playback interface of this

channel.
If several channels are triggered, clicking

button takes you to the synch playback interface. Check

checkbox to select one channel for playback or select multiple channels for synchronous playback.

The maximum number of channels for synchronous playback supported varies to different models.

Event playback interface. You can select the main stream or sub stream from the dropdown list for playback.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Figure 6. 6 Interface of Playback by Event

Pre-play and post-play can be configured for the playback of event triggered record files.

Pre-play:

The time you set to play back before the event. For example, when an alarm triggered the

recording at 10:00, if you set the pre-play time as 5 seconds, the video plays back from 9:59:55.

Post-play:

The time you set to play back after the event. For example, when an alarm triggered the recording

ends at 11:00, if you set the post-play time as 5 seconds, the video plays back till 11:00:05.

You can click

button to select the previous or next event. Please refer to Table 6.1 for the

description of buttons on the toolbar.

6.1.4 Playing Back by Tag

Purpose:

Video tag allows you to record related information like people and location of a certain time point during playback.

You are also allowed to use video tag(s) to search for record files and position time point.

Before playing back by tag:

Enter Playback interface.

Menu>Playback

Search and play back the record file(s). Refer to

Chapter 6.1.2 Playing Back by Channel

for the detailed

information about searching and playback of the record files.

Содержание DN41R











































































































Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды

annke DN41R, Руководство пользователя

Результаты поиска

Содержание DN41R

Отзывы:

Похожие инструкции для DN41R

Бренды по названию

Популярные бренды