ANITA ©
GPS/G serie
21
B) The way of adjust connect determent-organ
a)
[Notice] If no clearance between cut-thread cam roller and both side of cut-thread cam , may
be cut-thread could not be achieved or machine could be locked.
b) Put cut-thread cam roller inter the cut-thread cam active part, connect determent-organ
screw touch the part (A) of cut-thread connect pole, and then fix screw.
[Notice] If the position of rot is not nicety, cut-thread returns to a cut-thread raw location
speed is slow or first needle state is not good.
Fig. 32
C) Cut cop latch location
a) please loose cut-thread, drive the screw linking and cutting shuttle dabber fixation .
b)The eager cop latch holds hook face and (A) alignment
c)Screw fixed screw tightly
[Notice] If the position is not
nicety, may be cut-thread
could not be achieved or
machine could be locked.
Fig. 33
D) Connect with the direction of determent-organ
www.garudan.cz
