AngioDynamics NanoKnife, Руководство пользователя, Страница: 56 / 91

56
160-104694 Rev 01
Version 2.2.0
3. Select the minus button to delete the Row.
4. Confirm deletion by clicking the Yes button, Figure 5-38.
Figure 5-38: Deletion Confirmation Box
5. Click Apply when finished
NOTE #2: When a Row is deleted, the procedure may not be sufficient to fully cover the
lesion. Please check the
Probe Placement Grid for any Ablation Zone Voids: The Black
outline inside the ablation zone. Depending on the location of the probes and the voltage
selected, the void may be large or small (see Figure 5-25). In some cases, the void may be
a single Black dot within the Ablation Zone. Move the probes or increase the voltage to fill in
ablation zone voids.
Conversely, if the User wants to add a Row in the
Procedure Spreadsheet
, the User
would follow the same steps as they did to delete a Row except the User will replace
the minus button with the plus button.
1. Click the edit button on the
Procedure Spreadsheet
.
2. Click the plus button.
3. (Optional) Edit the new row values. (e.g. Change P+ and/or P- probe pair
combination etc.)
4. Click Apply when finished.
NOTE: The process of adding a Row is limited by the probe configuration selected in the
Probe Selection screen. In this example, a Four-probe configuration was selected. If the
User tries to add a Row that exceeds the combinations of a Four-probe configuration, a
warning box will appear as shown in Figure 5-39.
Figure 5-39: Maximum Probe Reached Attention Box