manualshive.com logo in svg

AngioDynamics NanoKnife, Руководство пользователя, Страница: 32 / 91

Поделиться
Скачать
AngioDynamics NanoKnife Скачать руководство пользователя страница 32

32 

160-104694 Rev 01 
Version 2.2.0 

5.1.1   Table of Buttons 

 

 Exit 

button on the Information screen quits the 

application and shuts down the generator. 

 

 

 

About

 button on all screens opens the About dialog box, 

which provides contact information, software, generator 
firmware, and RFID firmware versions, and TPM serial 
information. 

 

 

 

 

Next

 button on all screens takes you to the next screen.

 

 

 

Back

 button takes you to the previous screen.

 

 

 

Settings

 button on the Information, Probe Selection and 

Probe Placement Process screen opens the 
Settings dialog box, which displays the selected 
language and Pulse Timing control setting.

 

 

Export

 button on the Information and Pulse Generation 

screens opens an Export dialog box, which allows 
the User to save procedure data to a USB Flash 
drive. 

 

 Add Row 

button on the Probe Placement Process 

screen allows the User to add a new probe pair 
pulse sequence to the procedure. When a 

probe 

pair pulse sequence

 is added, a new line with 

default parameters is displayed in the table.

 

 

 Delete Row

 button on the Probe Placement Process 

screen allows the User to remove a probe pair pulse 
sequence from the ablation pulse configuration. 

 

 

 Edit

 button on Procedure Spreadsheet of the Probe 

Placement Process screen allows the following: 

▪

 

Activate the +/- buttons to add/remove probe 
pair pulse sequence.  

▪

 

Allows the editing of the white cells in the 
procedure spreadsheet.

 

Apply

 button on Procedure Spreadsheet of the Probe 

Placement Process screen allows the User to save 
the updated settings in the spreadsheet.

 

 

Autoset Probes

 button on the Probe Placement Process 

screen resets the placement of the probes on the 
grid to their default settings.

 

 

Save Ablation

 button on the Probe Placement Process 

screen allows the User to save an ablation marked 
on the grid.

 

 

Clear Ablations

 button on the Probe Placement Process 

screen will erase any ablations marked on the grid.

 

 

Clear Ablations

 button on the Probe Placement Process 

screen will erase any ablations marked on the grid 
after a procedure has been started.

 

 

Zoom In

 on the Probe Placement Process screen button 

increase the magnification of the grid view.

 

Содержание NanoKnife




























































































Отзывы:

Нет отзывов