manualshive.com logo in svg

AngioDynamics NanoKnife, Руководство пользователя, Страница: 27 / 91

Поделиться
Скачать
AngioDynamics NanoKnife Скачать руководство пользователя страница 27

27 

160-104694 Rev 01 
Version 2.2.0 

  
 
 

I

NSTALLATION 

AND 

S

TART

-U

P

 

 

4.1 System 

Location 

The Generator must be installed and operated in an 
environment that conforms to the operating conditions specified 
in Section 10.4. 

The Generator must be installed on rigid surfaces suitable to 
withstand its weight. 

In addition, the Generator must be installed in a way that any 
surface parallel to the Power Unit’s rear panel and in 
relationship to its ventilation grids, remain at least 5 cm 
(centimeters) away. 

Care must be taken to avoid items (e.g., dust covers) that can 
occlude the ventilation grids. 

WARNING!

 

The Generator must be connected to the safety ground of 

the main. The 

Main Power Supply Cord

 can ensure proper 

grounding only if connected to properly grounded main 

system, through suitable main sockets.

 

WARNING!

 

The Generator must not be used in the presence of 

flammable mixtures.

 

 

 

Installation Instructions 

•

 

Connect the 

Main Power Supply Cord

 (supplied by 

the manufacturer) to the cord connector located on 
the back panel. 

S E C T I O N

Содержание NanoKnife




























































































Отзывы:

Нет отзывов