AngelTrax Hybrid Quest Скачать руководство пользователя

Страница: 63 / 77

SD Card Slot

Remote

Rec. SD

Rec. 1

Rec. 2

A/V

Output

12V DC

Output

Host

Reset

LAN

Power Supply

GPS

PWR

Link

Main Board

Slave

AngelTrax

| 56

Sub Menu (Cont.)

SD Record Module

(Optional Feature)

1. The SD Record Module features are applicable when the

optional daughter board is installed in the Hybrid Quest™
DVR and the SD Card Slot on the front of the DVR is enabled
(see Figure 12).

2. From the Sub Menu, select the SD Record Module feature

(see Figure 13) using the arrow buttons on the remote, and
press Enter.

3. The SD Record Module menu will have the following

adjustable features: Format SD (Manual or Auto), Format SD
(Run) and Upgrade (Run) (see Figure 14).

4. The first Format SD option is used to set Manual or Auto

formatting (see Figure 14). Use the plus or minus buttons
on the remote to select your preferred option.

5. The second Format SD option is used to begin the

formatting process (see Figure 14). Use the Enter button to
begin formatting.

6. Before selecting the Upgrade option, please contact

technical support at the AngelTrax corporate office at
1.800.673.1788.

NOTICE - SD DAUGHTER BOARD:

The SD Record Module features are ONLY available if
the optional SD Daughter Board has been installed on
the Hybrid Quest™ DVR and the SD Card Slot on the
front of the DVR is enabled.

Содержание Hybrid Quest














































































Результаты поиска

Содержание Hybrid Quest

Отзывы:

Похожие инструкции для Hybrid Quest

Бренды по названию

Популярные бренды

AngelTrax Hybrid Quest, Быстрая настройка

Результаты поиска

Содержание Hybrid Quest

Отзывы:

Похожие инструкции для Hybrid Quest

Бренды по названию

Популярные бренды