1
2
3
4
AngelTrax
| 49
From the Main Menu, use the arrow buttons on the remote to
select Peripheral Setup (see Figure 1), and press ENTER.
There are four settings under the Peripheral Setup feature.
Settings include: Buzzer Setup, Alarm Setup, Sequence Setup
and Password Setup (see Figure 2).
Buzzer Setup
1. From the Peripheral Setup menu, select Buzzer Setup (see
Figure 2) by pressing ENTER on the remote.
2. Press the plus or minus buttons on the remote to turn the
volume OFF for the following Buzzer features: Key Beep,
Power On, Video Loss, Alarm Event, Motion, Time Duration
and HDD Error (see Figure 3). Press the plus or minus
buttons on the remote again to turn the Buzzer features
back to ON.
3. Press the plus or minus buttons on the remote to adjust
the seconds on the Time Duration feature (see figure 4).
The length of time for the buzzer to sound may be adjusted
from one to 60 seconds.
4. To save your changes and return to the Peripheral Setup
menu, press the Menu button on the remote.
Alarm Setup
THIS FEATURE IS NOT USED IN THE TRANSPORTATION/
MOBILE INDUSTRY.
Peripheral Setup
CAUTION:
It is not suggested that the following settings be adjusted. Settings should be left at their
factory default. Altering these values could result in poor or inaccurate performance.
