
IT
GB
DE
FR
ES
- 18 -
C13960
6101.
fm
English
Natural gas
Proceed as follows.
1 - Turn off the gas supply
tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(B)
and
remove the control panel
(C)
.
4 - Undo the screw
(D)
of
the pressure connection.
5 - Connect the pressure
gauge
(E)
to the pres-
sure test point
(F)
.
6 - Turn the gas supply tap
back on.
7 - Light the burner and turn the knob to the mini-
mum flame setting.
8 - Remove the minimum flame injector
(G)
and re-
place it with the one suitable for the type of gas
in use (see table at back of manual),
screwing it fully down.
9 - Slowly unscrew the injector
(G)
until the
pressure reading complies with the values
in the table (see back of manual).
10 - Check the stability of the flame.
11 - After making the setting, seal the screw with paint.
12 - Switch off the burner, turn off the gas supply tap
and disconnect the pressure gauge.
13 - Replace the control panel
(C)
and the knobs
(A)
on completion of the operation.
Liquid gas
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(B)
and remove the control
panel
(C)
.
4 - Remove the minimum flame injector
(G)
and re-
place it with the one suitable for the type of gas
in use (see table at back of manual), screwing
it fully down.
5 - After making the setting, seal the screw with
paint.
6 - Replace the control panel
(C)
and the knobs
(A)
on completion of the operation.
To carry out this operation,
proceed as follows.
1 - Turn off the gas supply
tap.
2 - Pull off the knob
(A)
.
3 - Undo the screws
(B)
and
remove the control panel
(C)
.
4 - Undo the screws
(D)
and
extract the cap
(E)
.
5 - Pull off the cone
(F)
.
6 - Clean the cone
(F)
and
its seat.
7 - Coat the cone with grease
(F)
, fit it in its seat
and turn it a few times.
8 - Pull off the cone
(F)
to remove the excess
grease.
9 - Replace the cone
(F)
, the cap
(E)
, the control
panel
(C)
and the knobs
(A)
.
GREASING THE GAS TAP
IDM-39606100900.tif
A
E
F
G
B
C
D
F
E
D
A
B
C
IDM-39606101000.tif