Angell M Cruiser, Инструкция по эксплуатации

Страница: 63 / 80

63
4.2 - Storing the battery
4.3 - Cleaning the battery
4.4 - Recharging the battery
1. Plug the charger into an earthed electrical outlet preferably.
2. Connect the tip of the charger to the battery.
3. When the battery is correctly inserted, both rear lights come on.
It takes 2 hours for a full charge.
4. Once charged, unplug the charger and disconnect it from the battery.
4.5 - Internal battery
Your Angell has a second battery, which, once the removable battery is removed, provides power to the different
functions (such as alarm, GPS, etc.) for 5 days at a temperature of 20°C in an dry place.
Caution, this Li-Po battery cannot be recharged when the temperature is below 0°C. It continues to operate until
it is switched off. This means that your removable battery will not charge your internal battery and the functions
may not be activated when you remove the removable battery.
The performance of your Angell may be impaired if your internal battery has a charge rate of less than 20%.
Like any mechanical product, an electric bicycle is subject to wear and tear of its components. If the service life of
any of the components is reached or exceeded, the electric bicycle may potentially fail, causing injury. Any cracks,
scratches, or changes in color in certain areas subjected to high pressure indicate that the life of the component has
been reached and that it must therefore be replaced.
5 - Maintaining your Angell Bike
We recommend servicing by an authorized repairer every 1,500 km or 12 months (whichever comes fi rst).
5.1 - Original spare parts and Angell accessories
Make sure that you replace or have replaced any faulty parts on your Angell Bike with original Angell parts
by contacting an authorized dealer or via the Angell Bike website.