Angell M Cruiser, Инструкция по эксплуатации

Страница: 55 / 80

55
2.2.1 - Connecting the battery for the first time
The first insertions can be difficult. It is advisable to insert and remove your battery about ten times to run in
the parts.
1. Insert the locking key into the battery.
2. Connect battery B to the bike, as shown in the picture below:
3. Turn the key to the left to lock the battery.
4. Remove the key.
Finally, adjust the saddle height by looking at the 2.2.4 paragraph.
The battery is pre-charged up to about 30% so that you can start setting your Angell Bike parameters
as soon as it is delivered.
Before using your Angell for the first time, we recommend that you fully charge the battery.
Check the pedals direction in order to not damage the thread.
Inversion can cause irreversible damage to the bike’s cranks. Follow the instructions on the packaging of
your pedals.
2.2 - Getting to know your Angell Bike and prepare it for its first rides
Angell M Rapide & Cruiser
Angell S Rapide et Cruiser