Anest Iwata MSA-200, Инструкция по эксплуатации, Страница: 14 / 18

－１４ －
3-7 Cleaning and maintenance
Fully clean after job is finished in order to get longer lifetime and good performance at next job.
WARNING
During cleaning, be sure to wear protective cover such as glasses, mask or gloves
to avoid serious injury caused by paint or solvent which might enter your eyes or you
might inhale.
Be sure to stop pump, reduce air pressure (operating air, atomizing air) and fluid
pressure down to 0 pressure before disassembling multi-spray gun.
CAUTION
Never use commercial or other parts instead of ANEST IWATA original spare parts.
Important
• Do not immerse the whole multi auto gun in thinner.
• Do not clean gun while aiming gun tip upwards.
• Clean air cap set with attached brush, not by metallic brush.
If not, distorted or damaged air holes can fail pattern shape or spray particles.
Process Where to clean How to clean Remarks
1 nozzle tip Remove from gun and clean it. refer to 3-3
2 fluid passage of gun
body Clean fluid passage with cleaning liquid which is
compatible with paint being used.
2 filter set
①
Remove filter joint[24-3].
②
Remove filter set[24-2] and clean it.
refer to16.6
4. Selection of nozzle tip according to kind of paint.
H I N T !
<Numbering system>
Pattern width 20 cm at 25cm spray distance.
Fluid output 0.4ml/sec/cm of width at
fluid pressure 4.9MPa (49bar ／ 720PSI)
NT-20 04 atomizing air pressure 0.15MPa (1.5bar
／
21.4PSI)
Use nozzle tip with large figures of last 2 digits when you spray paints of high viscosity or
easily clogged.
※
Refer to the below chart and select proper nozzle tip.
model
fluid output
l/min
pattern width
cm
model
fluid output
l/min
pattern width
cm
NT-1502CMU
NT-1503CMU
NT-2002CMU
NT-2003CMU
NT-2004CMU
NT-2005CMU
NT-2503CMU
NT-2504CMU
NT-2505CMU
0.18
0.27
0.24
0.36
0.48
.60
.45
.75
.60
13 ~ 18
13 ~ 18
18 ~ 23
18 ~ 23
18 ~ 23
18 ~ 23
23 ~ 28
23 ~ 28
23 ~ 28
NT-3003CMU
NT-3004CMU
NT-3005CMU
NT-3006CMU
NT-3503CMU
NT-3504CMU
NT-3505CMU
NT-3506CMU
0.54
0.72
0.90
1.08
0.63
0.84
1.05
1.26
28 ~ 33
28 ~ 33
28 ~ 33
28 ~ 33
33 ~ 38
33 ~ 38
33 ~ 38
33 ~ 38