Anest Iwata Air Gunsa Concept AZ1 HTE 2S, Инструкция по установке, использованию и обслуживанию

Страница: 4 / 24

4
6.1 INSPECTION/ REPLACEMENT STANDARD
WHERE TO INSPECT REPLACEMENT PART
a. The hole passage of air cap (1) and fluid nozzle (2).
Replace if it is crushed or deformed.
b. Packing.
Replace if it is deformed or worn out.
c. Leakage from seat section between fluid nozzle (2)
and fluid needle set (7).
Replace them if leakage does not stop after fully cleaning fluid nozzle (2) and fluid
needle set (7).
If you replace fluid nozzle (2) or fluid needle set (7) only, fully match them and confirm
that there is no leakage.
7. SPARE PARTS LIST
NEVER REMOVE FLUID NIPPLE and NOZZLE HOLDER FROM GUN
BODY!
Any malfunctions resulting by the removal of the following parts
will not be covered by the Warranty. In case of replacement contact your
Technical Service directly.
18-1 F
18-2
18-3
E
18
1 2 3
5
16-1
7
11-1
11-2
11-3
C
D
C
15
19
(opt)
9
8 6
10
13
12
12
14 17
16
11
REF. CODE DESCRIPTION
SPARE PARTS
3 W3COM3052 NOZZLE HOLDER
5 93842601 PATTERN ADJUSTMENT SET
6 W2010141000 FLUID NEEDLE ADJ. KNOB
7 W2010140900 NEEDLE ADJ. GUIDE
8 W2010140800 NEEDLE SPRING
10 W2010140600 NEEDLE PACKING NUT
11 W2010120100 AIR VALVE SET
11-1 W2010141700 AIR VALVE SPRING
11-2 W2010130600 AIR VALVE
11-3 W2010130500 AIR VALVE SEAT
12 W2COM4001 TRIGGER STUD
13 W2COM6051 TRIGGER
14 93845531 AIR ADJUSTMENT SET
15 W2COM5048 FLUID NIPPLE G3/8”
16 W2COM5004 SCREW
16-1 W2COM6050 PLUG
17 W2COM5000 AIR NIPPLE G1/4”
19 W2COM5052 PAINT TUBE (Opt. for AZ1 HTE 2P)
C W2KIT56 PACKING SET (3 pcs./1pk)
D W2KIT33 SLIDE RING KIT (10 pcs./1pk)
AG-1 - 1 lt. Aluminium Pin Lock Cup for AZ1 HTE 2S
18 04006100 AG-1 CONTAINER SET 1 lt.
18-1 04006110 LID SET
18-2 04006130 SUCTION CONTAINER 1lt.
18-3 04010000 SUCTION TUBE
E W2KIT43 FILTER SET (5 pcs./1pk)
F W2KIT42 LID PACKING SET (2 pcs./1pk)
REF. CODE DESCRIPTION
AZ1 HTE 2P - SHORT PATTERN - PRESSURE
1
W2CAP70AG13 AIR CAP SET ø 1.0 - 1.3 - 1.5 - 1.8 - 2.0
W2CAP72AG25 AIR CAP SET ø 2.5 - 3.0 - 3.5
2+9
W2ADU72AG10 FLUID NEEDLE SET ø 1.0
W2ADU72AG13 FLUID NEEDLE SET ø 1.3
W2ADU72AG15 FLUID NEEDLE SET ø 1.5
W2ADU72AG18 FLUID NEEDLE SET ø 1.8
W2ADU72AG20 FLUID NEEDLE SET ø 2.0
W2ADU72AG25 FLUID NEEDLE SET ø 2.5
W2ADU72AG30 FLUID NEEDLE SET ø 3.0
W2ADU72AG35 FLUID NEEDLE SET ø 3.5
AZ1 HTE 2P - LONG PATTERN - PRESSURE
1
W2CAP73AG13 AIR CAP SET ø 1.0 - 1.3 - 1.5 - 1.8 - 2.0
W2CAP70AG25 AIR CAP SET ø 2.5 - 3.0 - 3.5
2+9
W2ADU73AG10 FLUID NEEDLE SET ø 1.0
W2ADU73AG13 FLUID NEEDLE SET ø 1.3
W2ADU73AG15 FLUID NEEDLE SET ø 1.5
W2ADU73AG18 FLUID NEEDLE SET ø 1.8
W2ADU73AG20 FLUID NEEDLE SET ø 2.0
W2ADU73AG25 FLUID NEEDLE SET ø 2.5
W2ADU73AG30 FLUID NEEDLE SET ø 3.0
W2ADU73AG35 FLUID NEEDLE SET ø 3.5
AZ1 HTE 2S - SUCTION
1
W2CAP70AG13 AIR CAP SET ø 1.0 - 1.3 - 1.5 - 1.8 - 2.0
W2CAP70AG25 AIR CAP SET ø 2.5 - 3.0 - 3.5
2+9
W2ADU83AG10 FLUID NEEDLE SET ø 1.0
W2ADU83AG13 FLUID NEEDLE SET ø 1.3
W2ADU83AG15 FLUID NEEDLE SET ø 1.5
W2ADU83AG18 FLUID NEEDLE SET ø 1.8
W2ADU83AG20 FLUID NEEDLE SET ø 2.0
W2ADU83AG25 FLUID NEEDLE SET ø 2.5
W2ADU83AG30 FLUID NEEDLE SET ø 3.0
EN
AZ1 HTE 2P - AZ1 HTE 2S
- Pressure & Suction Spray Gun