2
2. SAFETY WARNING
FIRE AND EXPLOSION
Never use the following HALOGENATED HYDROCARBON SOLVENTS:
which can cause cracks or dissolution of gun body (aluminium) due to che-
mical reaction. UNSUITABLE SOLVENTS: methyl chloride, dichloromethane,
1.2-dichloroethane, carbon tetrachloride, trichloroethylene, 1.1.1-trichlo-
roethane.
Sparks and open flames are strictly prohibited.
Paints can be highly
flammable and can cause fire. Do not expose to open flames, electrical
goods, cigarettes etc.
Securely ground spray gun using conductive air hose.
(<1M
Ω
) Always
ensure that the spray gun is earthed correctly.
PROTECTION OF HUMAN BODY
Use in a well-ventilated site, using a spray booth.
Poor ventilation can cause organic solvent poisoning and fire.
Always wear protective gear (safety glasses, mask, gloves) to avoid
inflammation of eyes and skin.
In case of any physical discomfort, imme-
diately seek medical advice.
The noise level of
AIRGUNSA
Spray Gun doesn’t exceed the
85 dB (A)
A-weighted sound pressure value about the risk of daily exposure to noise.
The use of individual hearing protection is always recommended,
becau-
se the terms of use and the influence of other noises in the job area, could
increase the average value allowed.
Pulling the trigger many times during operation, may cause carpal tunnel
syndrome
. Always rest, in case of tiredness.
IMPROPER USE
Never point gun towards people or animals.
Never exceed maximum working pressure or maximum operating
Temperature
.
Always release air and fluid pressure before cleaning, disassembling
or servicing.
Otherwise, remaining pressure can cause bodily injury due to
improper operation or scattering of cleaning liquid.
Tip of fluid needle set has a sharp point.
Do not touch the tip during maintenance to avoid accidents.
Never use this gun to spray foods or chemicals.
Otherwise, foreign
substance, could cause corrosion of fluid passages which could adversely
affect health.
Never alter this spray gun,
to avoid insufficient performance and damage.
1.1 TECHNICAL DATA AZ1 HTE 2
AZ1 HTE 2P - PRESURE
Short Pattern
1.0
HTE-PO
2.5
200
184
220
1.3
230
1.5 - 1.8 - 2.0
240
2.5 - 3.0 - 3.5
HTE-P4
333
290
Long Pattern
1.0
HTE-P2
2.5
400
416
390
1.3
400
1.5 - 1.8 - 2.0
410
2.5 - 3.0 - 3.5
HTE-P3
333
330
320
330
AZ1 HTE 2S - SUCTION
1.0
HTE-PO
2.5
66
184
170
1.3
80
190
1.5
113
200
1.8
154
220
2.0
169
230
2.5
HTE-P3
167
333
250
3.0
205
290
3.5
217
300
ALWAYS OBSERVE WARNINGS AND CAUTIONS in this
instruction manual.
Symbols
WARNING
HAZARD LEVEL
CONSEQUENCE
WARNING
POTENTIALLY
HAZARDOUS
SITUATION
Death or serious injury
CAUTION
Minor to moderate injury
IMPORTANT
Property damage
AIRGUNSA spray gun, has been designed for the application of paints,
lacquers and other products that can be atomized by means of
compressed air, on all surfaces suitable to receive this type of treatment.
Before use, adjustment or maintenance, it is important to read
this instruction manual very carefully. This manual must be
stored in a safe place for any future reference.
COMPLIANCE TO STANDARD OF SPRAY GUN
AIRGUNSA Spray Guns comply with 2014/34/EU Directive relating to equipment
and protective systems intended for use in explosive potentially atmospheres.
COMPLETE COMPLIANCE MARKING:
ABBREVIATED COMPLIANCE MARKING ON THE SPRAY GUN:
II 2 G Ex h IIB T6 Gb X
TAmb
+5°C +40°C
II 2 G Ex h X
II 2 G Ex h X
II 2 G Ex h X
1. TECHNICAL SPECIFICATIONS
Max. working air pressure:
7.0 bar (100 PSI)
Weight g (lbs): (only gun)
476 (1.05)
Noise level (LAeqT)*:
77.06 dB(A)
Air Connection:
G1/4”M
Fluid Connection: Pressure
G1/4”M or G3/8”M
Fluid Connection: Suction
G3/8”M
Max. Temperature range:
Atmosphere 5 ~ 40 °C
Air-Fluid 5 ~ 43 °C
* Measuring point: 1m backwards from gun, 1.6 m height.
1.2 TECHNICAL DATA AZ1 HVLP
AZ1 HVLP PRESSURE
1.0
HVLP-P6
1.4
400
280
310
1.3
360
1.5
1.8
380
2.0
2.5
HVLP-P7
1.2
230
320
3.0
3.5
AZ1 HVLP SUCTION
1.0
HVLP-P5
1.4
31.2
184
90
1.3
64.2
170
1.5
70.2
200
1.8
129
250
2.0
142.8
290
EN
AZ1 HTE 2P - AZ1 HTE 2S
-
Pressure & Suction Spray Gun
Содержание Air Gunsa Concept AZ1 HTE 2S
Страница 23: ...23 Comments...
