ANEP BOX-C, Руководство пользователя

Страница: 13 / 24

ANEP BOX-C Version #1 09/22//2014
13
3.5.5 - Changing the access code programming
In programming mode :

Enter the sequence # 0 0 2

Enter the new programming code (1 to 7 digits) and «#»

Confirm new programming code (1 to 7 digits) and «#»
It is important to carefully note the new code.
The loss of this code imposes the mandatory return of the unit at the factory.
3
.5.6 - Gain Setting in intercom machinery and firefighter modes
Ability to independently adjust the Speaker and microphone gains used for
Intercom machinery and firefighter module modes.
These settings do not change the settings for the cabin alarm functions.
Microphone gain settings:
After entering the access code programming
Press the # 407 and a value of 1 to 15, then #
(1 = min / 15 = max gain)
Loudspeaker gain settings:
After entering the access code programming
Press the # 408 and a value of 1 to 15, then #
(1 = min / 15 = max gain )