andrews SUPAflo EVO SF60 EVO, Инструкция по установке и обслуживанию

Страница: 18 / 48

Installation
18
Requirements and regulations
Regulations for the construction of
flue gas systems are very different
for each country. It should be en -
sured that all national regulations
with regard to flue gas systems are
respected.
Pay attention to the following rec -
ommendations when dimensioning
a flue gas system.
Only approved flue gas material may
be used.
The flue gas system must be prop -
erly calculated to ensure a safe func -
tioning of the system.
Flue gas system components should
be removable for maintenance pur -
poses.
You have to take in consideration the
following material requirements.
Materials
Exclusively materials which are heat
resistant and resistant to flue gases
and aggressive condensate, and CE
approved may be used.
In particular for flue gas system see
the following data.
Air/Flue gas system
Plastic
PP*
Stainless
steel
Temperature
class:
T120 T250
Pressure
class
P1 P1
Corrosion
class:
W1 W1
* Use material with “E” reaction top
fire class, as minimum.
FLUE GAS DATA
Boiler
type
Nominal heat
output
Nominal heat
input
Flue
gas
connection
CO
2
Level
Flue gas tem -
perature
Flue gas
quantity
Max
permissible
flue resistan -
ce
SUPAflo
EVO
kW kW mm % °C g/s Pa
max min max min max min max min max min max min
SF61 142.3 31.3 145.0 32.2 150
10.2
± 0.2
9.4
± 0.2
75
± 2
60
± 2
53.7 12.8 200 10
SF62 190.4 42.0 194.0 43.1 150 71.9 17.1 200 10
SF63 237.6 47.0 242.0 48.4 200 89.6 19.2 200 10
SF64 285.7 56.5 291.0 58.2 200 107.8 23.0 160 10
SF65 381.3 79.6 388.0 80.5 250 143.7 30.7 400 10
SF66
476.7 94.6 485.0 97.0 250 179.7 38.4 300 10
SF67 540.2 120.0 550.0 122.2 250 203.7 48.4 484 10