andrews NEOflo SC25/200, Инструкция по установке, эксплуатации и обслуживанию

Страница: 27 / 32

NEO fl o Water Heater 25 September 2015
VENTURI (Fig. 9.4)
• Remove the lower front panel.
• Pull off the air tube (Fig. 9.4).
• Undo the three screws holding the venturi to the
gas valve.
• Undo the two screws holding the venturi to the fan
and remove.
• Ensure the gasket is transferred to the new venturi
or positioned on the fan before positioning the
replacement.
• Ensure the rubber gasket between the gas valve and
venturi is correctly positioned.
• Replacement is the reverse.
• Allow the heater to ignite and check for gas leaks
after the gas valve.
• After fi ve minutes check the rate and combustion is
correct to the data table. (inside front cover). Adjust
using the throttle screw on the gas valve clockwise
to decrease CO
2
, anti- clockwise to increase CO
2
.
(Fig. 9.1)
Fig 9.2
Earth connection
On/Off Switch
connections
LCD PCB
LCD DISPLAY
G061 O ring, gascock
G062 Gas Valve
G063 Electrode gasket
G064 Electrode
G065 Burner Insulation
G066 Burner
G067 Ignition Lead
G068 Pressure & Temperature Relief valve
G069 Venturi
B314 Unvented Kit
G070 Fan Gasket
G071 Fan
G072 User LCD Control
G073 Burner Control
G074 Flue Th ermostat
G075 High Limit Sensor
G076 Pocket, Th ermostat
G077 Control Sensor
SPARE PARTS