ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
148/166
7.18
WASHING THE MACHINE
Stop the engine. Remove ignition key.
Remove all residues of grass, leaves, etc.
Wash the machine with water jet.
Pay attention not to damage electric and electronic engine components.
Do NOT wash with high pressure water jets or steam jets the electric and electronic engine components.
Pay attention to:
Electrical connectors
Alternator, Starter
Injection pump
Electrical injectors
Electrical sensors on the engine and on the machine
Engine air filter
Fuel filter
Before washing the engine, protect all components previously described.
At the end of washing, start the engine and let it run for some minutes to dry completely.
Dry with compressed air.
Lubricate with grease all greasing points.
7.19
SPARE PARTS
For any service and replacement use only original spare parts, please contact the local authorized Dealer or
the Manufacturer.
Spare parts request must be complete of:
type of the machine;
machine serial number;
spare part code, as described in the Spare Part Catalogue.
If the spare part requested is part of a main component (such as engine, axles, etc.) it necessary to specify the
serial number of the main component.
The Spare Parts Catalogue can be requested to the local authorized Dealer or to the Manufacturer.
Do NOT use aggressive chemicals or detergents or alcohol, mainly for plastic parts.
