26
Double Stretcher – Operator’s Manual
Anderson Group
4.
By using the unloading lever, lower the folding arm completely. Verify that the
plastic film is centered in the cut and hold.
5.
If necessary, adjust the folding arm of the double stretcher as indicated in section
3.3 Positioning of the double stretcher for wrapping by using the unloading lever,
raise the folding arm and press the button
Continue (3)
on the remote control of
the wrapper to end the wrapping cycle.
NOTE :
Watch the end of the wrapping cycle for the first bale. Be
sure that the plastic film is well cut at the end of the cycle
and the plastic stays in its place. If this is not the case
please refer to the section 4 Settings.
