Anderson Group
Double Stretcher – Operator’s Manual
19
4.2
The angle of the stainless steel arm compared to the
ground
So that the film does not tear as it slides along the stainless steel arm, the arm must point
towards the ground. To proceed with adjusting this you must first lower the arm as far as it
will go, then loosen the three bolts as illustrated in Figure 6 and position the arm so that it
points towards the ground. Tighten the bolts when you have finished with the adjustment.
Figure 6 – Bolts to adjust to change the angle of the stainless steel arm compared to the ground
