22
Double Stretcher – Operator’s Manual
Anderson Group
Figure 7 – Bouton d’ouverture des coupe-plastique
2.
If necessary, remove the empty roll of plastic by pushing up on the roll to compress
the spring of the upper support. You use the same procedure to install a new roll of
plastic.
NOTE :
The supports of the plastic film roll should always be clean
and should turn freely. This will avoid jams, and tears in
the plastic film. If necessary, consult chapter 8 to learn
how to clean the support of the plastic film.
3.
Install the new roll of plastic film as indicated in Figure 8.
Figure 8 – Installing the plastic film in the stretcher sytstm
