10
2885 Country Drive #190 · St. Paul, MN 55117 · 800-348-1316 · www.leaktools.com
Set-up of The LeakTrac 2400
1. Look for a place to set up your LeakTrac 2400 that has a convenient connec-
tion to ground within 20 feet. Open the case and remove all components ex-
cept the Power Booster.
2. Plug the red banana plug from the Ground cable into the red socket of the
Power Booster and attach the clamp to ground.
Good connections to ground include:
Ladder anchors sockets
Diving board anchor bolts
Metal junction box conduit
Any metal rod stuck into the ground
If the ground you choose is painted, you
must scrape through the paint to assure an electrical connection is made with the
ground clamp.
3. Plug the black banana plug from the Input Float into the black socket on the
Power Booster. Unwind enough anchor cord to allow the float anchor to touch
the bottom of the pool and toss the anchor and float into the pool so that the
brass side of the float is down.
