6
2885 Country Drive #190 · St. Paul, MN 55117 · 800-348-1316 · www.leaktools.com
The Input Float:
This brass plate attached to a block of Styrofoam floats in the pool and puts the
charge into the water. A length of insulated wire to the black banana plug is used
to connect to the black input jack on the Power Booster
A lead weight provides a means for anchoring the float in its desired position.
The Ground Cable:
This clamp is used to make a connection to ground. A length of insulated wire to
red banana plug is used to connect to the red input jack on the Power Booster.
Headphones:
These standard headphones plug into the back of the Signal Processing Unit.
What Makes a Good Leak Track
Three factors contribute to the quality of the “Leak Track” and your ability to de-
tect it with the LeakTrac 2400.
1. Difference in conductivity of the pool shell in comparison to the point of low
resistance.
The LeakTrac 2400 does not work well in concrete pools
because the concrete itself conducts electricity to the
ground almost as well as a leak does.
One weak “Leak Track”
