1.
2.
Visually inspect the cooktop for damage. Also make sure all cooktop screws are on tight.
Place the cooktop into the countertop cut-out.
Counter Installation Instructions
Before installing the cooktop
— 15 —
The serial plate is located at the front edge of the
cooktop. When ordering parts or making
inquiries about your cooktop, be sure to include
the model and serial numbers.
Model and Serial Number Location
1.
2.
3.
4.
5.
Disconnect the power supply.
In the circuit breaker, fuse box, or junction
box, connect appliance and power supply
cable wires as shown below.
AN-2402: Circuit breaker fuse rating must be
above 40 A, and wire should be
2/8 or 3/8
copper.
AN-2412
: Circuit breaker fuse rating must
be above 50 A, and wire should be 2/6 or
3/6 copper.
Minimum acceptable size of conductors
should be no less than 10AWG, copper only,
and no less than167°F.
A wire-binding screw or stud used in the wire
terminal should be 10 or larger.
Connecting to a 3 wires power supply cable electrical system
Cable from Power Supply
Black Wire
Junction Box
Green Wire
(Grounding)
Red Wire
Red Wire
WARNING
The electrical power to the cooktop must be shut off while line connections
are being made. Failure to do so could result in serious injury or death.
An extension cord must not be used with this appliance. Such use may result
in a fire, electrical shock or other personal injury.
1.
2.
Serial plate is located at the front edge
of the burner box of the cooktop.