background image

Care and Cleaning

Cleaning the Cooktop

General cleaning for induction ceramic glass cooking surfaces is considerably easier than for 
cooking surfaces with radiant heating.

NOTE:

 To prevent accidental activation of the controls, it is recommended that you set the 

CHILD LOCK feature before cleaning.

— 12 —

Cleaning agents must not come into contact with the hot ceramic glass surface. All cleaning 
agents must be rinsed off thoroughly with clean water.
Do not use any aggressive cleaners such as grill or oven sprays, coarse scouring cleansers 
or abrasive pan cleaners.
Clean the ceramic-glass surface after each use when it is warm to the touch or cold. This 

will prevent spills from becoming burnt on. Remove water marks, grease and discoloration 

with a glass scraper and ceramic glass cleaner.

IMPORTANT

NOTE:

 You may purchase glass scrapers and ceramic glass cleaners from your local hardware 

store.

General Cleaning

1.

2.
3.

4.

When it is cool, wipe the ceramic glass surface with a damp cloth and a small amount of 
ceramic glass cleaner.
Wipe dry with a clean cloth.

Once  a  week,  thoroughly  clean  the  entire  ceramic-glass  cooking  surface  with  a 

commercially available ceramic glass cleaner.
Then, wipe the ceramic glass surface using a clean, soft cloth dampened with clean water 
and polish dry with a clean lint-free cloth.

Removing Heavy Soil

1.

2.
3.

Hold  the  glass  scraper  at  an  angle  of  about  45°  to  the 

ceramic-glass surface.
Remove soiling by sliding the blade across the area.
Use a ceramic glass cleaner as described in GENERAL 
CLEANING.

To remove food that has boiled over or stubborn spills, use a glass scraper.

Problem Soils

1. Remove sugar, melted plastic, aluminum foil, or other meltable materials with a glass 

scraper immediately and while still hot. Failure to do so can cause permanent damage to 

the cooktop surface. If the Cooking Zone has already cooled down, warm it up again.

IMPORTANT:

  There  is  a  risk  of  burning  yourself  when  the  glass  scraper  is  used  on  a  hot 

Cooking Zone. Use care and wear an oven mitt.

2.

Then clean the cooktop normally when it has cooled down.

NOTE:

 Scratches or dark marks on the ceramic glass surface caused by a pan base with sharp 

edges cannot be removed. However, they do not impair the function of the cooktop.

Содержание AN-2402

























Отзывы: