background image

CAUTION

 

The pan base of suitable kitchenware heats up within a few 

seconds! The water should boil rapidly.

Introduction to Induction Cooking


Always position pots and pans before you switch on the 

Cooking Zone.
Dirty cooking zones and cookware use more electricity.
Whenever possible, always have the lid firmly placed on 

the pots and pans so that they are completely covered.


Selecting Cookware

Avoiding Scratches

Do not use dirty pans with grease buildup. Always use pans that are easy to clean after 

cooking and make sure that the bottoms of the pans are clean and dry.
When cooking with large amounts of liquid, use large pots so that nothing can boil over.
Do not let pans boil dry. This may cause permanent damage in the form of breakage, fusion 
or marring that can affect the ceramic cooktop (this type of damage is not covered by your 

warranty).

Match the pan size and Cooking Zone to the amount of food being prepared.

Tips for Saving Energy

Always follow the recommendations for proper cookware type and size. In addition:

Use Flat-Bottomed Cookware

Cookware  must  fully  contact  the  surface  of  the  cooking  element.  Use 
flat-bottomed pans sized to fit the cooking element and the amount of food 
being prepared. Check for flatness by rotating a ruler across the bottom of 
the cookware with a base less than 5".

You  can  also  check  cookware  suitability  with  a  magnet.  If  the 
magnet remains fixed to the base of the pan, the pan is suitable for 
induction cooking.

It is recommended to always use heavier gauge stainless steel cookware on your induction 
cooktop surface. This will help reduce the possibility of developing scratches on the ceramic 
surface. Low-quality cookware can scratch the cooktop surface.
Cookware  should  always  be  lifted  over  the  ceramic  cooktop  surface  to  prevent  scratching. 
Sliding any type of cookware over the ceramic cooktop can affect the overall appearance of the 
cooktop.  Over  time,  sliding  ANY  type  of  cookware  over  the  ceramic  cooktop  may  alter  the 
overall appearance of the cooktop. Eventually, the buildup of scratches can make cleaning the 
surface difficult and degrade the overall appearance of the cooktop.
Scratches  can  also  result  from  grains  of  sand  (e.g.,  after  washing  vegetables)  which  are 
dragged with the pot across the cooking surface.

For Best Results

— 10 —

Содержание AN-2402

























Отзывы: