Fix the holder on the choose local for the reader installa-
tion.
Pass the wiring that will be connected to the reader wiring
through the holder central hole. Connect the wiring and
isolate it;
Fit the holder in the bottom guide and then insert the screw
until fasten it.
Place the reader aligning the top part and fit it over the
guides;
04 - WIRING HARNESS
1 - Red -
12V x 1A power input;
2 - Black -
GND power input;
3 - Blue -
Signal input of the sound signaling BUZZER / Signal
input of the status signaling frontal LED;
4 - Green -
Wiegand output DATA 0;
5 - White -
Wiegand output DATA 1;
6 - Gray -
Opened door sensor timeout of 20 seconds (intermittent
beep after this period);
7 - Purple -
Reserved;
8 - Yellow -
Reserved.
Frontal
LED
Wiring
NOTE: To disable the open door sensor, connect the gray wire
to the black wire (GND).
05 - GUARITA IP CONNECTION
1 -
LN 104C EMF reader;
2 -
12VDC 1A power source;
3 -
Guarita IP module
POWER 12VDC 1A
ENGLISH
13
