Safety instructions
10
Edition 03/2013
UV lamp for InnuPure C16
The housing parts of the UV lamp are not resistant to the following substances:
hydrogen fluoride (HF/hydrofluoric
acid)
highly concentrated acids
cleaning powder
paint thinner
naphtha
gasoline
acetone
cleaning spray
ozone
3.10
Behavior during emergencies
Immediately unplug the mains plug from the mains outlet in situations of danger or
in the event of accidents!
Because a rapid response can save lives during an emergency, the following has to be en-
sured:
The operating staff must be familiar with the location of safety equipment, accident
and danger alarms as well as first aid and rescue equipment as well as their han-
dling.
The operator is responsible for the respective training of the operating staff.
All equipment for first aid (first-aid kit, eyewash bottles, stretcher, etc.) as well as
equipment for firefighting (fire extinguishers) must be within reach and easy to ac-
cess. All equipment has to be in a sound condition and should be checked regular-
ly.
3.11
Standards and directives
The UV lamp was manufactured according to the currently valid technology regulations and
the approved safety related regulations.
When constructing the UV lamp, the relevant safety and health requirements of the applica-
ble laws, standards and regulations were applied. The safety of the device is confirmed by
the CE mark and the declaration of conformity.
Information regarding safety corresponds to the currently valid regulations of the European
Union. In other countries the applicable laws and country specific regulations have to be
complied with.
Besides the safety instructions in this user manual and the local safety regulations that apply
to the operation of the device the general applicable regulations regarding accident preven-
tion, occupational health and safety and environmental protection have to be observed and
complied with.
References to potential dangers do not replace the work protection regulations which must
be observed.
