Safety instructions
8
Edition 03/2013
UV lamp for InnuPure C16
3.4
Technical condition
The UV lamp for the InnuPure C16 corresponds in its design and construction to the current
state of the art technology. Unauthorized modifications or changes, especially such that af-
fect the safety of the staff and the environment, are generally not allowed.
The operator must only operate the UV lamp in a sound and operationally safe
condition. The technical condition must always comply with the legal requirements
and regulations.
Prior to every use, the UV lamp must be checked for damage and sound condition.
Any changes in the UV lamp affecting its safety must be reported by the operating
personnel to the operator without delay.
3.5
Requirements for the operating personnel
The UV lamp for the InnuPure C16 must only be commissioned, operated and ser-
viced by trained personnel instructed in technical safety.
The operation or servicing of the UV lamp by minors or individuals under the influ-
ence of alcohol, drugs or medication is not permitted.
It must be ensured that only authorized personnel works at the UV lamp.
The operating personnel must be familiar with the dangers arising from the sub-
stances used inside the InnuPure C16. The appropriate protective equipment must
be used.
3.6
Safety instructions for transport and installation
Only transport the UV lamp in its original packaging! Ensure that the UV lamp has
cooled down, cleaned and decontaminated before transport.
The UV lamp for the InnuPure C16 may only be put into operation by service per-
sonnel of Analytik Jena AG or by persons authorized by Analytik Jena AG.
To prevent health damage the following must be observed when moving the UV
lamp in the laboratory (lifting and carrying):
– Prevention of bumping or falling down since this could result in damage of the
device or destruction of the illuminant. Beware of glass breakage.
