Analytic Systems SolarMax SMP100, Руководство по установке и эксплуатации

Страница: 3 / 24

3
SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for the charge
controller
WARNING
Installation of the SolarMax Charge Controller should be performed by qualified personnel only. The SolarMax has no
user-serviceable parts. To reduce the risk of electric shock, do not perform any installation (or servicing) other than
specified in these instructions. See our RMA and warranty policies should servicing be required.
1. Do not expose the SolarMax charge controller to rain, snow, spray, or dust. To prevent overheating, do not
obstruct any ventilation openings.
2. Use of an attachment not recommended or sold by Analytic Systems may result in a risk of fire, electric shock,
or injury to persons.
3. Do not disassemble the SolarMax charge controller; consult the manufacturer first, or take it to a qualified
serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
4. To reduce risk of electric shock, disconnect from solar panel before attempting any maintenance or cleaning.
5. Never place the SolarMax charge controller directly above a battery; gases from battery will corrode and
damage it.
6. Never allow battery acid to drip on the SolarMax charge controller, especially when checking the specific
gravity of the battery or filling battery with distilled water.
Always isolate the SolarMax charge controller. Connect and disconnect the DC output connections only after
disconnecting the solar panels from the SolarMax charge controller.
CHARGE CONTOLLER
IMPORTANT SAFETY INSTRUCTIONS