ADM, HBOT & Sub Aspida
User Manual
Int. Approved
Document ref: PSA-811-14
June 2017
Page 31 of 43
Copyright © 2017 Analox Ltd. All Rights Reserved.
Commercial in Confidence
6)
Squeeze the grip on the extraction tool so as to achieve a firm hold on the oxygen sensor as
shown in Figure 21.
Figure 21 - Squeeze the extraction tool
7)
Lift the extraction tool vertically away from the device and the oxygen sensor should lift out of
its socket as shown in Figure 22.
Figure 22 - Removing the oxygen sensor
8)
Remove the old sensor from the extraction tool by gently pushing the sensor from the wide,
top end of the extraction tool, whilst not squeezing the grip.
The sensor contains lead and according to WEEE regulation must not be
placed in household waste bins. Please check local regulations for
information on the disposal of electronic products in your area.
