22
VIO 4K TPP PROGRAMMER'S GUIDE FOR v02.00.7X
3.7
Loading a View from memory
3.7.1
Usage
This command allows to load a previously memorized view
to apply on specified input layer.
It can be used automatically and with the manual apply
mode.
Warning: In auto-apply mode, the command is directly
applied without transition.
In manual mode, the command is applied with a transition
when the apply request is send.
3.7.2
Detailed commands sequence
Load a view from memory:
Syntax : <bank>,<screen>,<input>,
1PBrcr
L
F
<bank> is the memory index (64 memories addressed from
0 to 63).
<screen> is the destination screen index (6 screens addressed from 0 to 5).
<input> is the source index (9 inputs addressed from 0 to 8).
OR
Load a view from memory to active input:
Syntax : <bank>,<screen>,
1PBirr
L
F
<bank> is the memory index (64 memories addressed from 0 to 63).
<screen> is the destination screen index (6 screens addressed from 0 to 5).
3.7.3
Example of changing a view to specific input (auto-apply mode)
Picture 16 : Load a view from 20
th
bank slot to Input 2 HDMI
Picture 15: Loading a view to an input - Web RCS
