14
VIO 4K TPP PROGRAMMER'S GUIDE FOR v02.00.7X
to 0, meaning that no enumeration is running.
sending:
1
#
L
F
or
3
#
L
F
When <value> is equal to 1, the device will enumerate all registers
values, for all indexes values in case of multidimensional registers. This can produce a huge
amount of data. The end of the enumeration is signaled when the DIESE register
automatically returns to the value 0, meaning that the controller must wait until receiving
#
0
C
R
L
F
.
When <value>
is equal to 3, the device works the same way, except that it will not
enumerate registers having their default value, reducing the amount of received data.
o
Registers read back managed by the controller:
The controller should read all used registers, slowly enough to avoid being saturated,
issuing as many read commands as needed.
