Analog way ULTRA VIO VU301-IOD1, Руководство пользователя

Страница: 36 / 39

APPENDIX A / ANNEXE A VIO1600 & ULTRA VIO
PAGE 36
COMMAND RESPONSE
COMMAND DESCRIPTION VALUE / VALEUR
COMMANDE RÉPONSE DESCRIPTION DE LA COMMANDE
TYPE
MIN MAX DESCRIPTION
CONTROLS COMMANDS / COMMANDES DU MENU CONTROL
xU VERU Device version.
Rd
0 65535 Example: 104 = Version 1.4
xI I_ Identification number. Rd 0 65535 Value displayed in hexadecimal in the device.
yo OPT Options available. Rd 0 65535 0 = without option.
QE EPD 2:2 pull down correction. Rd/Wr 0 1 0 = off 1 = auto.
yl LOCK Key locking. Rd/Wr 0 1 0 = unlocks 1 = locks
yi EISP Auto-lock Rd/Wr 0 1 0 = off 1 = on.
ye EPOS Erase memories. Rd/Wr 0 1 1 = erase all memories (automatic reset).
Y FRES DEFAULT VALUE. Rd/Wr 0 1 1 = Default value action (automatic reset).
fr BFCR Red level adjustment of the FADE. Rd/Wr 0 255
fb BFCB Blue level adjustment of the FADE. Rd/Wr 0 255
fg BFCG Green level adjustment of the FADE. Rd/Wr 0 255
COMMUNICATION PORT COMMANDS / COMMANDES DE COMMUNICATION
ne LANE Communication port selection Rd/Wr 0 1 0 = RS232 1 = LAN
nr LANR Reset of the LAN parameters. Rd/Wr 0 1 1 = reset.
ns LANS Store the LAN parameters. Rd/Wr 0 1 1 = store.
na ADIP
IP address and port selection (for
modification)
Rd/Wr 0 3
0 = all IP address / ports
1 = IP local address / local port
2 = IP remote address / remote port
3 = IP gateway address.
nw IPA_
First byte of the address selected by the
na command.
Rd/Wr 0 255
nx IPB_
Second byte of the address selected by
the
na command.
Rd/Wr 0 255
ny IPC_
Third byte of the address selected by the
na command.
Rd/Wr 0 255
nz IPD_
Forth byte of the address selected by the
na command.
Rd/Wr 0 255
np PORT
Number of the port (local or remote)
selected by the
na command.
Rd/Wr 0 65500
local port: 10000 to 10999.
remote port: 0 to 65500.
nk NTMK Netmask. Rd/Wr 0 24
Value = number of bit to 0 (from right).
example: 2
255.255.255.252
3 255.255.255.248
.............
8
255.255.255.0.............
24 255.0.0.0
nt TCP Protocol selection. Rd/Wr 0 1 0 = UDP 1 = TCP
GENLOCK COMMANDS (ULTRA VIO only) / COMMANDES DU GENLOCK (ULTRA VIO uniquement)
GR GENR Genlock reference selection Rd/Wr 0 3
0 = internal 1 = SDTV
2 = HDTV 3 = error
GA GENA Genlock reference status Rd 0 3
0 = internal 1 = SDTV
2 = HDTV 3 = error
GF GENF Genlock type Rd 0 10
0 = no signal. 1 = not compatible.
2 = NTSC (3.58/60). 3 = PAL (4.43/50).
4 = 1080i @ 50 Hz. 5 = 1080i @ 59.94 Hz.
6 = 1080i @ 60 Hz. 7 = 720p @ 50 Hz.
8 = 720p @ 59.94 Hz. 9 = 720p @ 60 Hz.
10 = 480p @ 60 Hz.
GT GENT Frame frequency of the genlock signal Rd 0 65535 Value in hundredth of Hz
GS GENS Sub carrier adjustment of the genlock. Rd/Wr 0 255
GP GENP Horizontal adjustment on the genlock Rd/Wr 0 127
GL GENL Genlock input load Rd/Wr 0 1 0 = Hi-Z 1 = 75 ohms
OTHERS COMMANDS / AUTRES COMMANDES
yS STO Image parameters storing. Rd/Wr 0 1 1 = STORE action (automatic reset).
? DEV Device type. Rd 0 65535 30 = VIO1600 35 = ULTRA VIO
# DEV...... Send all device parameters.
Rd
NOTE: Rd = Read only command / Commande de lecture. Rd/Wr = Read and write command / Commande de lecture et d'écriture.