Chapter 2 : STARTING (continued)
VIO1600 & ULTRA VIO
PAGE 12
2-3. INPUT #2 DESCRIPTION
c
CONNECTION:
You can connect to this input one of the following source:
•
A composite video source on the
C.V
BNC connector or on the
COMPUTER/TV/HDTV
HD15 (bottom)
connector.
•
A S.VIDEO source on the HD15 (bottom) connector.
•
A Component video source on the
COMPUTER/TV/HDTV
HD15 (bottom) connectors.
•
A HDTV source on the
COMPUTER/TV/HDTV
HD15 connectors.
NOTE:
The VIO1600 & ULTRA VIO accept the 720p and 1080i HDTV formats.
•
A RGBS source on the
COMPUTER/TV/HDTV
HD15 (bottom) connector.
•
An analog computer source (RGBHV, RGsB, RGBS) on the
COMPUTER/TV/HDTV
HD15 connector.
•
A SDI or HDSDI source on the
(HD)SDI
BNC connector (V301-ID1 version only).
d
LOOP-THROUGH:
You can connect a control monitor to the loop-through connectors (top BNC & HD15 connectors).
e
INPUT #2 CONNECTION DIAGRAM:
OUTPUTS
f
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
VIDEO RGB/S
YUV & HDTV (analog)
S.VIDEO (Y/C)
COMPOSITE VIDEO
PIN 1
RED.
RED.
Cr / Pr.
C (chrominance).
PIN 2
GREEN.
GREEN.
Y.
Y (luminance).
VIDEO (NTSC, PAL...)
PIN 3
BLUE.
BLUE.
Cb / Pb.
PIN 6
RED return.
RED return.
Cr / Pr return.
C return.
PIN 7
GREEN return.
GREEN return.
Y return.
Y return.
return.
PIN 8
BLUE return.
BLUE return.
Cb / Pb return.
PIN 10
GND.
GND.
PIN 13
H sync or C sync (S).
C sync (S).
PIN 14
V sync.
HD15 female connector of the device.
g
AUDIO SOURCE:
You can also connect an AUDIO stereo source on jack 3.5 connector.
5
6
1
15
10
11
