VIO1600 & ULTRA VIO
Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)
PAGE 21
4-5. FUNCTIONS DESCRIPTION (continued)
3
[
IMAGE
]
+
ENTER.
NOTE: The image menu contents will be different in case of input & output type selected.
3-1
[
centering
]
+
ENTER.
Adjust automatically the image in the centering pattern
.
3-2
[
pos. settings
]
+
ENTER.
Select one of the following function with
+
ENTER.
3-2-1
[
H position
]
+
ENTER.
Adjust the Horizontal position with
+
ENTER.
3-2-2
[
V position
]
+
ENTER.
Adjust the Vertical position with
+
ENTER.
3-2-3
[
H size
]
+
ENTER.
Adjust the Horizontal size with
+
ENTER.
3-2-4
[
V size
]
+
ENTER.
Adjust the Vertical size with
+
ENTER.
3-3
[
aspect in
]
+
ENTER.
Select the Aspect Ratio of your input source with
+
ENTER.
•
[
4/3 standard
]
: 4/3 input format.
•
[
16/9 letterbox
]
:
Letterbox input format.
•
[WS anamorphic]:
Widescreen Anamorphic input format (video) or 16/9 input format (computer).
3-4
[
aspect out
]
+
ENTER.
Select one of the following output aspect ratio with
+
ENTER.
•
[
standard
]
: The entire image and the aspect ratio are preserved.
•
[
crop
]
: The image is zoomed without deformation to fill the screen, but some borders of the image will be
cropped. The aspect ratio is preserved.
•
[full screen]
: The image is stretched to fill the screen. The aspect ratio is not preserved.
•
[custom]
: The image can be zoomed, cropped and stretched at your convenience.
•
If the selected input is a VIDEO signal the IMAGE MENU displays the following items:
3-5
[
brightness
]
+
ENTER.
Adjust the brightness with
+
ENTER.
3-6
[
contrast
]
+
ENTER.
Adjust the contrast with
+
ENTER.
3-7
[
color
]
+
ENTER.
Adjust the color with
+
ENTER.
3-8
[
hue
]
+
ENTER.
Adjust the tint of the picture (NTSC only) with
+
ENTER.
3-9
[
u / over scan
]
+
ENTER.
Select Underscan or Overscan with
+
ENTER.
•
[
underscan
]
: Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
•
[
overscan
]
: Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid seeing
the corners and the borders. Standard TV display mode is overscan.
3-10
[
preset
]
+
ENTER.
This function allows setting all the image parameters to the factory settings. Select
[YES]
and validate with
ENTER
.
