Analog way QuickMatriX QMX150, Руководство пользователя, Страница: 36 / 75

36
7.2.6 Input management
Under the
COLORIMETRY
section, you have:
- BRIGHTNESS: define the selected input luminosity level,
- CONTRAST: define the selected input contrast level,
- COLOR:
define the selected input color level (0:black and white, full: full color),
- HUE: set up the hue phase of your NTSC signal.
Under the SHARPNESS section, you find:
- LEVEL: define the selected input luinosity level.
Under the USER GAIN section, you find:
- THE RED/GREEN/BLUE: increase/decrease the Red/Green/Blue level of your input.
Next you have the ASPECT tab. All settings about the blanking and aspect ratio are available there:
Under the BLANKING ADJUSTMENTS :
- H&V POSITION SIZE: you can manually adjust the input blanking with the V&H size or position.
Under the ASPECT RATIO section:
- ASPECT IN: forces a particular aspect ratio for the source. (5:4, 4:3, etc). This setting has no effect when set
to native,
- PREDEFINED CROP: choose a specific cropped ratio if you use a source with black bands on top/bottom or
left/right,
- ASPECT OUT: define the way the image will be displayed into a layer (full screen, centered, cropped or 1:1),
- OVERSCAN: choose to apply or not a predefined zoom on the image (use with video signal).
Next settings available on the
ASPECT tab are:
- CROP: use the Top, Bottom, Left
and Right values to crop your
input.