Analog way Pulse Скачать руководство пользователя

Страница: 13 / 54

RACKMOUNT INFORMATION

Tabletop mounting : The

Pulse LE

can be used directly on a table, the unit is equipped with 4

handy anti-slip rubber feet.

Rack mounting : The

Pulse LE

is compatible with a 19” enclosure. Please follow the instructions

below to install the device in a 19” rack.

Place the device in your rack. Attach the device to the rack by using 4 screws through the front panel

holes (screws not included).

Rear fixing is also recommended, in particular for permanent installations. The

Pulse LE

is equipped

with drill holes designed for compatibility with most rackmount braces.

Connect all of the cables of the device and attach them to the rack with the help of tie wraps.

IMPORTANT :

- The openings in the side and rear panels of the device are for cooling. Do not cover these openings

to avoid cutting air circulation.

- Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the

Pulse LE.

- The maximum ambient operating temperature should not exceed 40 °C (104°F)

- The rack and all mounted equipement in it must be reliably grounded according to national and/or

local electrical standards.

NOTE

* Dismantling front handles of the device will invalidate warranty on after sales services of

your

Pulse LE

It is strongly advised to avoid using front handles as rests for your

Pulse LE,

they are designed for

manipulation purposes only.

UNPACKING AND INSPECTION

1 x

Pulse LE

seamless scaler/switcher

1 x Power supply cord

2 x DVI male to HD15 female and DVI female cable

1 x HD15 to 5 BNC cable

1 x Ethernet cross cable (for device update)

1 x Set of 3 audio 5 pin screw terminals

1 x RCS (Remote Control Software) CD-ROM (PC only)

1 x User manual on CD-ROM

1 x Quick Start guide

Содержание Pulse























































Результаты поиска

Содержание Pulse

Отзывы:

Похожие инструкции для Pulse

Бренды по названию

Популярные бренды

Analog way Pulse, Руководство пользователя

Результаты поиска

Содержание Pulse

Отзывы:

Похожие инструкции для Pulse

Бренды по названию

Популярные бренды