41
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
8.3.3
Composition Advanced settings
Under
Advanced
(in Composition), set the layer Draw priority, Deinterlacing and Scaling algorithm.
-
Draw priority:
Set a number to override the layer number priority system (see Layer Priority page
37). By default, all layers have a Draw priority at 0. Draw priority values goes from -5 to 5.
For example: a layer with draw priority set at 1 is displayed on top of all layers with draw priority
under 1, no matter the Layer number. If layers have same Draw priority, the Layer number defines
the priority.
Tip: Use draw priority wisely to have a clear configuration. Prioritize using layer numbers and use draw priority for rare
exceptions (force layer on foreground or background).
-
Deinterlacing:
Select the Deinterlacing mode (
No deinterlacing
,
Line doubling
or
Blending
).
-
Scaling algorithm
: Select the Scaling technology (
Bilinear
,
Cubic weighted
,
Quintic
weighted
,
Sinus
weighted
or
Bicubic
).
8.4
Color correction (layer)
Adjust color correction independently for each layer.
1.
Go to
Layers
and select one or more layers to control in the Layer list.
2.
Open the
Color Correction
panel to set the Gamma, Saturation, Contrast and Brightness levels for
each display.
3.
Red (R), Green (G), and Blue (B) values can be adjusted for contrast and brightness separately.
8.5
Advanced
In
Advanced
, set the frame rate values and synchronize the layers.
Note: Frame rate can be modified only if no audio track is embedded to the media.
8.5.1
Synchronize to another layer
This feature makes one layer follow the framerate of another layer or a MIDI timecode (MTC).
1.
Go to
Layers
and select one or more layers to control in the Layer list.
2.
Click
Sync selected
3.
Select the layer or MTC to be the source for the current layer.
Note: By default, the layers do not synchronize to any source.
8.5.2
Set layer Frame rate
Note: Frame rate can only be set if:
-
the layer is not part of synchronization.
-
the media file doesn't have audio track (even if audio is disabled).
-
and media is not a stream video or input.
