UG-173
Evaluation Board User Guide
Rev. B | Page 6 of 24
120-PIN CONNECTOR
(PARALLEL CMOS
INPUTS)
TIMING ADJUSTMENT
JUMPERS
DRIVER CIRCUIT FOR
SERIAL PORT INTERFACE
(SPI) LINES
OPTIONAL SERIAL
PORT INTERFACE
(SPI) CONNECTOR
CYPRESS Fx2 HIGH SPEED
USB 2.0 µCONTROLLER
EPROM TO LOAD
USB FIRMWARE
05
87
0-
0
03
Figure 3. FIFO Components (Bottom View)
FIFO 4.1 SUPPORTED ADC EVALUATION BOARDS
All the evaluation boards that can be used with the high speed ADC FIFO evaluation kit can be found at
www.analog.com/FIFO
. Some
evaluation boards may require an adapter between the ADC evaluation board output connector and the FIFO input connector
.
If an adapter is
needed, send an email to
indicating the part number of the adapter, the ADC being used, and contact
information.
