ADSP-21262 EZ-KIT Lite Evaluation System Manual
1-15
Getting Started
When Windows XP completes the driver installation for the
selected device (see step 1), a window shown in
Figure 1-11
appears on the screen.
4. Verify the installation by following the instructions in
“Verifying
Driver Installation”
.
Verifying Driver Installation
Before launching the EZ-KIT Lite evaluation system, verify that the USB
driver software is installed properly:
1. Ensure that the USB cable connects to the evaluation board and
the PC.
2. Verify that the yellow USB monitor LED (
LED11
) is lit. This signi-
fies that the board is communicating properly with the host PC
and is ready to run Vi+.
Figure 1-11. Windows XP – Completing Driver Installation
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from