Installation Tasks
1-12
ADSP-21262 EZ-KIT Lite Evaluation System Manual
11. Click
OK
.
The driver installation is now complete, as shown in
Figure 1-9
.
12. Click
Finish
to exit the wizard.
Verify the installation by following the instructions in
“Verifying Driver
Installation” on page 1-15
.
Windows 2000 USB Driver
Vi+ 3.5 installation software pre-installs the necessary drivers for
the selected EZ-KIT Lite. The install also upgrades an older driver if such
is detected in the system.
[
Prior to running the Vi+ 3.5 installer, ensure there are no
other Hardware Wizard windows running in the background. If
there are any wizard windows running, close them before starting
the installer.
Figure 1-9. Windows 98 – Completing Software Installation
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from