UG-1698
Rev. 0 | Page 7 of 23
GETTING STARTED
Software installation includes an updated version of the
DPGDownloader
software and the necessary files for the
AD9166-FMC-EBZ evaluation board, including the schematic,
board layout, and data sheet. Download the
DPGDownloader
software online from the
, at
wiki.analog.com/resources/eval/dpg/dacsoftwaresuite
Also install the
software to configure the device.
the software that is used to load the registers in the
software enables full access to the
register
map and has several views and features that simplify its use.
Many of the
software features are detailed in the ACE User
Guide section.
Download this software online from the
software page.
software package includes the required plugins for the
AD9166-FMC-EBZ evaluation board.
INITIAL SETUP
Complete the following initial steps to get started with the
evaluation of the device:
1.
Install the
DPGDownloader
software on the PC. Analog
Devices, Inc., recommends verifying the basic setup before
making any modifications to the evaluation board.
2.
Connect the PC to the
using the USB
connector.
3.
Connect the evaluation board to the
using
the FMC connector.
4.
Switch the power connector on the
to power
up both the evaluation board and the
Several different configurations and scenarios are explained in
this user guide with step by step instructions. Choose the
configuration that meets the requirements. A summary of the
user guide is provided in the ACE User Guide section.
