UG-1698
Rev. 0 | Page 12 of 23
5.
Select
Single Tone
from
Add Generated Waveform
, as
shown in Figure 10. A single tone panel is added to the
vector list.
6.
Enter 2.458 GHz in
Data Rate
(or DAC clock frequency).
7.
Enter 16 bits in
DAC Resolution
.
can receive
either 16-bit or 11-bit data because the JESD204B data
packing engine packs data in 8-bit sizes. If 11-bit data is
chosen, the
DPGDownloader
software appends zeros to
the data-words to create 16-bit words for transfer to the
data framer. Because the datapath is 16 bits, Analog Devices
recommends sending 16-bit data to the device so that true
16-bit math is computed with truncation happening prior
to the DAC decoder. Sending 16-bit data this way can
improve spurious performance compared to sending
11-bit data.
8.
Enter 800 MHz in
Desired Frequency
.
9.
Keep 0.0 dB in
Amplitude
.
10.
Clear the
Unsigned Data
only
accepts twos complement data. Ensure that
Generate
Complex Data (I & Q)
is not selected.
11.
From the
Vector
dropdown list, select
4I: Single Tone –
800.080 MHz; 0.0 dB; 0.0° (In-Phase)
as the data vector.
12.
Leave the other options at the default values. The
SYNC
Status
indicator may show a red cross, as shown in Figure 11.
13.
Click the download button to download the pattern from
the computer to the
unit.
14.
Wait for the play button to become active, and then click
the play button to begin vector playback to the AD9166-
FMC-EBZ evaluation board.
2232
4-
01
0
Figure 10. Choose Single Tone as the Vector Type
22
32
4
-0
11
DOWNLOAD
BUTTON
PLAY
BUTTON
Figure 11.
DPGDownloader
: Selected Vector and Downloaded to the
