Amylior LOGOSILVER OUTCHAIR L, Руководство пользователя

Страница: 9 / 76

P·9
2.2. DECLARATION OF CONFORMITY
As a manufacturer, Logo Silver declares under its own responsibility that the OUTCHAIR
complies with specifications 93/42 and 2007/47 relative to the European directives for
medical devices.
The design, development and manufacture of the OUTCHAIR are in full compliance with
safety with the following technical requirements:
• Risk analysis and management according to NF EN ISO 14971 standards
• Design requirements NF EN 12182 and NF EN 12184
Dynamic Stability, Static Stability, Fatigue Testing, Static load promotional literature, Use
and Maintenance Guide, Labelling, Determining Energy Consumption, Determining Speed,
Acceleration and Deceleration, ability to climb the maximum safety slope, ability to climb
obstacles.
Compliance with the NF EN 12184 standard means among other things that the values
required for an incline, an obstacle crossing, and a speed are reached or exceeded by the
OUTCHAIR.
2.3. GENERAL SAFETY INSTRUCTIONS
• The OUTCHAIR can only be used in accordance with instructions.
• Only duly informed and authorized persons can use the OUTCHAIR.
• Only one person at a time can travel in the OUTCHAIR.
• For safety reasons, it is imperative that the user always wears a helmet and fastens
their seat belt.
• Do not use the wheelchair under the influence of alcohol, drugs or any other narcotics
restricting your driving ability.
• Do not lean forward, over the sides or over the top edge of the wheelchair, especially if
the ground is sloping.
• To transfer, get as close as possible to the new seat.
DANGER !
For safety reasons, it is imperative that the user always wears a
helmet and fastens their seat belt.
NOTES
All safety instructions contained in this operating manual and in all
valid associated documents must be observed and followed. This
notice must be available to the user at all times.