Amylior LOGOSILVER OUTCHAIR L, Руководство пользователя

Страница: 47 / 76

P·47
• Point the television remote control at the CJSM2-BT Receiver LED and press the «On
/ Off» button twice.
• After each successful instruction, a check mark appears momentarily on the screen,
select «Learn Code» to add a new code to the sequence or «Exit» if the sequence is
complete.
• Now, the On / Off command has a checkmark followed by 3 dots to indicate that a
sequence has been learned.
• Use the same process to teach multi-digit channels. You can choose to store specific
channels instead of numbers in your «Channel Selection» menu.
Enabling and disabling IR codes:
IR codes can be enabled or disabled using the «IR Set Up» menu.
• To deactivate an IR code, select the - key on the front panel of the CJSM2-BT.
Deactivated IR codes are displayed with an X next to the highlighted command.
• To activate an IR code, select the + key on the front panel of the CJSM2-BT. Active IR
codes are displayed with a check mark next to the highlighted command.
Deleting IR codes:
• To remove the infrared code from a command, highlight the specific command in the
device menu and press the right button. Then select the «Delete code» option.
• To delete all IR codes from a device, select «Delete All Codes». Then switch off then on
the CJSM2-BT to make sure it is working properly.
7.8.9. Locking the control system
The control system can be locked using a sequence of buttons on the numeric keypad or
with a physical key. This will be set at the factory.
Keyboard lock:
• When the control system is activated, hold the On / Off button down.
• After one second, the control system will beep. Release On / Off button.
• Shift the joystick forward until the control system emits a beep.
• Shift the joystick backwards until the control system emits a beep.
• Release the joystick, a long beep will sound.
• The wheelchair is now locked.
•
The following screen will be displayed next time the control system is started up.
Wheelchair lock:
• If the control system is off, press the On / Off button.
• Shift the joystick forward until the control system emits a beep.
• Shift the joystick back until the control system emits a beep.