AMX TDS Скачать руководство пользователя страница 71

Страница: 71 / 106

Digital TV Configuration Manager

AMX TDS (Television Delivery System)

Transmitter Setup - Firmware Upgrade

Select

Firmware Upgrade

in the

Manage Transmitters

page to access the options shown in :

The options on the Transmitter

Setup - Firmware Update

page include:

Transmitter Setup - Tuner Setup (DTV-TX02-DVB-S - Cont.)

• Channel List:

The main window on this page provides a listing of all channels detected by the
Transmitter, complete with the following information and options:

• Ch. No:

Channel number. To change channel numbers, click and type
directly into this text field.

• Ch. Name:

Channel name. To change channel names, click and type
directly into this text field.

• Frequency:

Channel frequency (read-only)

• Strength:

Strength of channel’s signal (read-only)

• Encrypted:

Click these check boxes for all channels that are encrypted. If
Encrypted is selected, the Transmitter will decode the signal

• Enabled:

Click these check boxes to enable each listed channel.

Save

Click to save all changes made on this page.

Re-Stream:

Click to re-start the stream for the selected channel(s).

Note: If streaming has been changed between full stream and individual
channel selection the unit will automatically reboot.

Disable all Channels:

Click to disable (and de-select) all channels from all streams.

Note: If the tuner unit is currently streaming, the unit may reboot depending on
the stream type.

FIG. 79

Transmitter Setup - Firmware Update

Содержание TDS











































































































Результаты поиска

Содержание TDS

Отзывы:

Бренды по названию

Популярные бренды

AMX TDS, Руководство по эксплуатации/справочник

Результаты поиска

Содержание TDS

Отзывы:

Бренды по названию

Популярные бренды