AMX TDS, Руководство по эксплуатации/справочник

Страница: 58 / 106

AMX TDS Installation Overview
50 AMX TDS (Television Delivery System)
3.
Rename each Transmitter, so that you can identify them easily in the future.
a.
Select a Transmitter in the Manage Unit list.
b.
Enter a new name for the selected Transmitter in the Unit Name text field.
c.
Click Update .
4.
Scan for channels on the tuner in each Transmitter:
a.
Select Tuner A Setup to access the Tuner A Setup page.
b.
Select the Tuner Type (see page 56).
c.
Click Scan . The scan process can take several minutes to complete, depending on the number of
frequencies, and number of channels per frequency being scanned. The following page is displayed
during the scan process (FIG. 70):
d.
Click Refresh .

If the scan is not yet complete, Refresh simply returns you to the Scanning In Progress page.

When the scan is compete, Refresh to view the results of the scan, in the form of a listing of
Channels found on the scanned frequency.
5.
Select the channels that you want to enable.

You can manually enable up to five channels from the same transport stream.

Select Full Stream to enable all channels from a transport stream.
After booting up a Tx (or Rx), it must first be allocated an IP address (if DHCP
enabled) before appearing in the device list. Depending on the Network, this may
take a couple of minutes.
The Tuner B Setup option on this page is not used.
FIG. 70 Manage Transmitters - Channel Scan In Progress