Appendix B: AMX Lighting Curves
44
AMX Lighting PROlink/AXlink Programming
Similar to Curve 1, Curve 2 rolls off at 90% of the top end or about 105 volts maximum. FIG. 19
shows a curve that reduces the maximum output to 90% of maximum to conserve energy. It is also
called the 'energy saving curve'.
!
Relay turn on level = 1%
!
Dimming Range = 0 - 114 VAC.
FIG. 20 shows the low-voltage output of the RAD-VDR module. The voltage range is from 0 to 9
VDC when attached to test ballast. This curve can be used with 0-10 VDC dimming ballasts.
FIG. 18
Curve 1 with Low End Setting @ 5%, 10%, and 20% Volts RMS
FIG. 19
Curve 2 voltage output in volts RMS
FIG. 20
Curve 2 voltage output in volts DC
Содержание ProLink PRO-DP8
