AMX Precis LT Скачать руководство пользователя

Страница: 6 / 65

Important Safety Information

& Instructions

When using and installing your AutoPatch product, adhere to the following basic safety precautions.

For more information about operating, installing, or servicing your AutoPatch product, see your product

documentation.

Read and understand all instructions before using and installing AutoPatch products.

Use the correct voltage range for your AutoPatch product.

There are no user serviceable parts inside an AutoPatch product; service should only be done by

qualified personnel.

If you see smoke or smell a strange odor coming from your AutoPatch product, turn it off

immediately and call AutoAssist.

For products with multiple power supplies in each unit, make sure all power supplies are turned on

simultaneously.

Use surge protectors and/or AC line conditioners when powering AutoPatch products.

Only use a fuse(s) with the correct fuse rating in your enclosure.

Make sure the power outlet is close to the product and easily accessible.

Make sure the product is on or attached to a stable surface.

Turn off equipment before linking pieces together, unless otherwise specified in that product ’s

documentation.

For safety and signal integrity, use a grounded external power source and a grounded power

connector.

Turn off and unplug an enclosure before adding or removing boards, unless otherwise specified in

that product’s documentation.

To avoid shock or potential ESD (Electrostatic Discharge) damage to equipment, make sure you are

properly grounded before touching components inside an AutoPatch product.

Important Safety Information & Instructions

Содержание Precis LT


































































Результаты поиска

Содержание Precis LT

Отзывы:

Похожие инструкции для Precis LT

Бренды по названию

Популярные бренды

AMX Precis LT, Руководство пользователя

Результаты поиска

Содержание Precis LT

Отзывы:

Похожие инструкции для Precis LT

Бренды по названию

Популярные бренды